When you press this button, a problem report is generated and uploaded to a server forįlashing amber: The PRT is preparing the data for the problem report.įast Flashing amber: The PRT is sending the problem report log to the HTTP server. Press this button to create a problem report using the Problem Report Tool. System detects a factory reset.To perform a factory reset, press and hold the RESET button for about 10 seconds.Ī factory reset is performed successfully.įlashing green: Data transmission or reception is in progress through the WAN port.įast flashing green three times, then repeats: The analog device failed to register.įast flashing green: A factory reset is performed successfully. Slow flashing green: System is booting up.įast flashing green three times, then repeats: System failed to boot up.įast flashing green: The LED behaviour occurs in the following situations: Steady green: System booted up successfully and is ready for use.
The following figure shows the different LEDs and buttons found on the top of your ATA. It supports speeds of 10/100Mbps and full-duplex. The ATA network port performs autonegotiation for duplex and speed. The ATA 192 includes an extra LAN Ethernet port-An RJ-45 10/100BASE-T data port to connect to a device on your network, such One WAN network port-An RJ-45 10/100BASE-T data port to connect an Ethernet-capable device to the network. Two RJ-11 FXS (Foreign Exchange Station) ports-Your ATA has two RJ-11 ports that work with any standard analog phone device.Įach port supports either voice calls or fax sessions, and both ports can be used simultaneously. The ATA 191 and ATA 192 are compact, easy to install devices. For the best fax and modem performance, continue To reduce fax failures, use overseas mode, if available if not, set the fax machine transmission speed to low.ĭata devices, such as facsimile machines and modems, may not function optimally. Don’t connect an extension to a fax machine, and don’t use the fax machine with a Overhead paging systems provide alarms and public-address announcements in buildings. The ATA supports analog telephony voice devices, such as overhead paging adapters and answering machines, that emulate a regular You use the phone’s flash button for hold, resume, transfer, and conference. The information that analog phones display depends on the model you have. Install your ATA with the components in the box.ĭevices Associated with Your ATA Use your ATA to connect these types of devices to your network: Install your ATA with the components that are included in the box. Light-emitting diodes (LEDs) on the ATA provide status. Your new analog telephone adapter (ATA) has two interfaces: The connected device can then function like the IP phones in your network. Your analog telephone adapter (ATA) allows you to connect an analog device, such as an analog phone or fax machine, to your
0 kommentar(er)
